In situ LA-ICP-MS analyses of mica and wolframite from the Maoping tungsten deposit,southern Jiangxi,China     

Chen  Guanghong  Gao  Jianfeng  Lu  Jianjun  Zhang  Rongqing 《中国地球化学学报》2020,39(6):811-829

Acta Geochimica - The Maoping tungsten deposit is located in the Nanling W–Sn metallogenic belt in South China. Greisen and quartz vein types of mineralization developed in this deposit....  相似文献   

Impacts of confining pressure and safety thickness on water and mud inrush in weathered granite     

Jinquan Liu  Weizhong Chen  Zhiping Deng  Taogen Liu 《Marine Georesources & Geotechnology》2020,38(2):144-153

Abstract

Due to the strong disintegration and water erosion of completely weathered granite, water and mud inrush disasters are apt to take place in this zone during underwater tunnel construction. The pore, compactness, seepage path length, fracture geometries and their interconnections for water and mud transfer are strongly influenced by confining pressure and waterproof-resistant slab safety thickness. In order to inspect the influence, a series of experiments based on a self-designed testing system and non-Darcy testing method were performed. The results indicated that the water and mud inrush evolution increased with the increase of confining pressure and decreased with the increase of safety thickness. In particular, the confining pressure mainly influences the initial evolution stage, and a critical safety thickness to prevent water and mud inrush is obtained. Besides, the non-Darcy testing method results shows that the water and mud inrush evolution affects the influence of non-Darcy flow. For example, while the safety thickness was smaller than the critical value, the evolution was large and unstable and its behavior transferred into nonlinear. In this case, the flow changed to non-Darcy flow.  相似文献   

Effect of nano-MgO on mechanical performance of cement stabilized silty clay     

Kai Yao  Dongliang An  Na Li  Chen Zhang  Aizhao Zhou 《Marine Georesources & Geotechnology》2020,38(2):250-255

Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献   

基于四叉树的多波束水深数据快速检索方法          下载免费PDF全文

孟浩  徐卫明  刘天阳 《海洋测绘》2020,40(6):25-28

针对水下地形测量仿真器中的多波束测深结果仿真环节中,对海量已知水深点云数据进行处理时存在的检索效率低、内存占用大的问题,设计了一种基于四叉树的数据处理方案。以四叉树数据结构并采用序列化方式存储索引文件,提高点云数据的检索效率;通过内存映射的方法读取海量点云数据,减少内存占用。数据实验表明:相对于常见的遍历检索,在检索点云数不超过总点云数的约四分之三时,四叉树水深点云检索效率提高了1倍以上;在检索点云数越少,总点数云越多时,四叉树水深点云检索的效率最多可提升30倍以上。基于四叉树的数据处理算法可有效地提高点云数据的检索效率,适合于多波束测深结果仿真过程中的海量点云数据的处理。  相似文献   

环加速间隙下的脉冲星星风制动模型          下载免费PDF全文

胡永峰  仝号 《天文学报》2020,61(3):31

为了解释间歇脉冲星PSR B1931+24在射电噪比射电宁静状态下更大的自转减慢率和模拟蟹状星云脉冲星的自转演化,建立同时考虑了具有不同加速电势的核区和环区的环加速间隙下的星风制动模型.其中对于PSR B1931+24通过计算得到它的磁场强度和磁倾角,并且预言了其理论制动指数.对于蟹状星云脉冲星,通过计算得到它的磁场强度和磁倾角,还计算得到其制动指数随周期的演化和它在周期-周期导数图上的自转演化.相比于真空加速间隙、外加速间隙等,环加速间隙也同样能够适用于星风制动模型.  相似文献   

一种无人艇自适应无线通信系统的设计应用     

卢筑飞  陈天利  王超 《数字海洋与水下攻防》2020,3(4):309-313

随着无人艇技术的发展成熟，各型无人艇已逐步应用到民用和军用领域。无线通信系统作为无人艇的重要组成部分，承担着无人艇与母艇之间信息交互的功能。从无线通信技术的发展现状出发，分析出适用于无人艇应用场景的无线通信技术及工程设计方法，并设计了一种自适应无线通信系统。该系统能根据无人艇工作状态提供连续稳定的数据链，经试验测试，运行效果良好。  相似文献   

准噶尔盆地西北缘及玛湖凹陷沉积储集层研究进展^*          下载免费PDF全文

张昌民  尹太举  唐勇  郭旭光  赵康  潘进  陈美玲 《古地理学报》2020,22(1):129-146

准噶尔盆地西北缘玛湖凹陷中心区10×10⁸ t级砾岩大油区的发现,带动了该区沉积储集层研究的不断深入。作者梳理了准噶尔盆地西北缘及玛湖凹陷的沉积储集层研究现状和进展,认为准噶尔盆地西北缘及玛湖凹陷的沉积储集层研究的进展主要表现为: (1)提出了新的砂砾岩储集层岩石相和岩石学分析方法;(2)探索形成了新的沉积储集层地球物理测井和地震描述技术;(3)针对不同层系,在沉积物源、沉积相、沉积环境、沉积体系和沉积模式等方面取得大量新认识,建立了大型退覆式浅水缓坡扇三角洲沉积模式,指导油气勘探不断获得新突破;(4)在成岩作用理论指导下,所发现的储集层埋藏深度不断增加。研究表明,玛湖凹陷的沉积体系具有继承性: 从二叠纪到新近纪,发育了火山—碎屑岩沉积体系、细粒—蒸发盐沉积体系以及粗粒冲积扇、扇三角洲、辫状河三角洲等沉积体系,气候、构造和湖平面变化控制了沉积体系的形成和演化。沉积储集层研究为玛湖砾岩大油田的发现提供了有力的理论支持。未来应当加强针对古老层系和深部地层的沉积储集层研究工作,重视新理论新技术在西北缘和玛湖沉积储集层研究中的应用,已经形成的理论技术需要在勘探实践中接受进一步检验和完善。  相似文献   

煤层气井产出剖面测试技术及应用     

张雷  樊洪波  侯伟  张伟  郝帅  孙晓光 《吉林大学学报(地球科学版)》2020,50(2):617-626

现有常规油气井产出剖面测试方法在煤层气井中适应性较差，测试范围和测量工艺等存在局限性，施工成功率低。因此，本文对煤层气井产出剖面测试技术进行了整体的系统化设计和研发。通过紧凑的结构设计、高度集成，研发了一套可同时进行温度、压力、磁性定位、热式流量、探针持气率、微波持气、涡轮流量和超声流量等多参数测量的煤层气井测井仪，并研制了一套一次下井可进行多种测试技术测量的煤层气井产出剖面测试技术。同时提高了测试仪器的精度和抗干扰能力，开发了多任务多窗口的便携地面系统操作，并研制新型偏心测试井口应用于煤层气井，实现修井作业时不间断连续测试。该技术在鄂尔多斯盆地石楼北区块3口煤层气井进行了现场试验，取得精确、连续的测试数据。测试结果显示，石楼北区块8^#+9^#煤层为主力产气、产水层。  相似文献   

基于随机森林的光子计数激光雷达点云滤波     

陈博伟  庞勇  李增元  卢昊  梁晓军 《地球信息科学学报》2019,21(6):898-906

新一代星载激光雷达卫星ICESat-2首次采用了微脉冲光子计数激光雷达技术,由于单光子探测的灵敏性导致数据在大气和地表下层产生了大量噪声,因此对光子计数激光雷达点云数据实现信号和噪声的分离是开展进一步应用研究的前提和基础。本文选择美国俄勒冈州和弗吉尼亚州2个研究区,采用MATLAS数据,根据光子点云数据的特点构造了12个光子点云特征,对所构造的特征利用随机森林进行变量筛选,用机器学习方法对光子点云进行分类,并将建立好的模型推广到整个研究区。研究结果表明,本文构建的分类器分类总精度达到了96.79%,Kappa系数为0.94,平均生产者精度和用户精度分别为97.1%和96.8%。在相对弱噪声、平坦地形区域和强噪声、复杂地形区域都取得较好的分类结果。本文结果显示了基于少量样本通过机器学习的方法构建模型,可以推广到较大范围区域的光子点云分类应用中。  相似文献